-= BEASTX - BE ABSOLUTE STABLE =- http://www.beastx.com/ Dies ist ein Diskussionsforum. de Fri, 18 May 2012 06:45:46 GMT vBulletin 60 http://www.beastx.com/images/misc/rss.png -= BEASTX - BE ABSOLUTE STABLE =- http://www.beastx.com/ dead beast x http://www.beastx.com/showthread.php?2657-dead-beast-x&goto=newpost Thu, 17 May 2012 19:48:32 GMT got a new beast x for my birthday on wednesday and set about fitting it tonight but it wont initalise,,the lights flash up and down both sets of... got a new beast x for my birthday on wednesday and set about fitting it tonight but it wont initalise,,the lights flash up and down both sets of lights for a while then up and down on the right hand bank of lights but never goes any further,,the only thing i seem to be able to do is get into reciver type menu ]]> Setup issues nick.m http://www.beastx.com/showthread.php?2657-dead-beast-x Robbe RBS1010HV swash servo frequency http://www.beastx.com/showthread.php?2656-Robbe-RBS1010HV-swash-servo-frequency&goto=newpost Thu, 17 May 2012 14:51:54 GMT Does anybody know the recommended servo frequency for a Robbe RBS1010HV, I have them at 200Hz at the moment which seems fine but I just want to be... Does anybody know the recommended servo frequency for a Robbe RBS1010HV, I have them at 200Hz at the moment which seems fine but I just want to be sure.

Thanks,

Arnaud ]]> Setup issues catzjes http://www.beastx.com/showthread.php?2656-Robbe-RBS1010HV-swash-servo-frequency update problem http://www.beastx.com/showthread.php?2655-update-problem&goto=newpost Thu, 17 May 2012 07:13:39 GMT I have a version 1.0.0 microbeast which i wanted to update to a version 3. But the update program are unable to find it. It says "NO BEASTX FOUND"
When I connect my AR7200BX it dos not have any problem finding it. So i am pretty sure that everything is correct connected.
Is it possible to send the beastx to you so that you could update it for me ?? ]]> USB2SYS / Computer software tl1000lee http://www.beastx.com/showthread.php?2655-update-problem Please help with aileron rotation speed on T-Rex 450 just converted to flybarless. http://www.beastx.com/showthread.php?2654-Please-help-with-aileron-rotation-speed-on-T-Rex-450-just-converted-to-flybarless.&goto=newpost Wed, 16 May 2012 23:54:21 GMT Please help with aileron rotation speed on T-Rex 450 just converted to flybarless. My roll rate is extremely slow. Cyclic servos move very slowly... Please help with aileron rotation speed on T-Rex 450 just converted to flybarless.

My roll rate is extremely slow. Cyclic servos move very slowly with stick inputs.
When setting Point L the servos move as very fast as I would expect.

Heli flies perfectly otherwise stable & smooth. I love it but am afraid to fly it inverted because it takes forever to get it rotated. With the flybar head it rolled at least 4 times faster (maybe more).

What should I try to get the roll and pitch moving much faster? As soon as I resolve this issue I intend to convert my 600 to Flybarless also.

Thanks,

Setup:
Mavrikk G5 Pro Blades
Align 450 DFC Head
Align Pro Extreme swashplate.
Hitec HS-5065MG Digital Servos on Cyclic
JR-3500G Digital Tail Servo – Tail Functions Perfectly
Futaba R617FS Receiver
Futaba 18MZ Transmitter
Microbeast Upgraded to Version 3.0 before installation.

Microbeast Setup: (Tail servo works perfectlu

Setup Menu Point A Red
Setup Menu Point B Blue
Setup Menu Point C Blue
Setup Menu Point D Flashing Blue
Setup Menu Point E End Points set correctly
Setup Menu Point F Blue
Setup Menu Point G Servos Centered Correctly
Setup Menu Point H Red – 120 degrees
Setup Menu Point I Red – Everything moves in the correct direction
Setup Menu Point J Set to 6 degrees with digital meter.
Setup Menu Point K Set to Plus and Minus 12 degrees
Setup Menu Point L Blue – Full Throws
When setting Point L the servos move as very fast as I would expect.
Setup Menu Point M Blue
Setup Menu Point N Red

Parameter Menu Point A Set Correctly
Parameter Menu Point B Flashing Blue – I have tried them all
Parameter Menu Point C Red – I have tried them all to no avail
Parameter Menu Point D Red – Works Great
Parameter Menu Point E Flashing Red – Works Great
Parameter Menu Point F Purple – Works Great so Far
Parameter Menu Point G Purple - I have tried them all to no avail
Parameter Menu Point H Purple - I have tried them all to no avail

Any suggestion will be greatly appreciated.

Regards, David S Livingston ]]> Setup issues dslivingston http://www.beastx.com/showthread.php?2654-Please-help-with-aileron-rotation-speed-on-T-Rex-450-just-converted-to-flybarless. Firmware older versions. For instance 3.0.1 Tail problem http://www.beastx.com/showthread.php?2653-Firmware-older-versions.-For-instance-3.0.1-Tail-problem&goto=newpost Wed, 16 May 2012 11:09:23 GMT Hello there, Due to problems with the tail of my T Rex 600 I am looking for older firmware versions to exclude any possible bugs of V3.0.8. My... Hello there,
Due to problems with the tail of my T Rex 600 I am looking for older firmware versions to exclude any possible bugs of V3.0.8.
My heli flies ok but durig calm hovers (also inverted) the tail travels slowly one direction. I can correct it with the stick input but as soon as left allone it does it's thing again. Even on the ground without touching the heli and without rotorblades rotation the tail travels from one end to the other. It does not happen every time but it does. I hope somebody can hel me with this issue.
Thanks in advance. ]]> USB2SYS / Computer software tomekyo http://www.beastx.com/showthread.php?2653-Firmware-older-versions.-For-instance-3.0.1-Tail-problem No tail stick input in setup or parameter menu to change settings with spectrum tx/rx http://www.beastx.com/showthread.php?2652-No-tail-stick-input-in-setup-or-parameter-menu-to-change-settings-with-spectrum-tx-rx&goto=newpost Tue, 15 May 2012 22:56:15 GMT Hello. First off, I love Beastx! I have three of them. This is 3.0.8 FW and a Spektrum AR115e receiver and Dx8 radio I had a minor crash... Hello. First off, I love Beastx! I have three of them.

This is 3.0.8 FW and a Spektrum AR115e receiver and Dx8 radio

I had a minor crash and now the beast won't respond to tail stick input to change any menu items when it was flying great before. The funny thing is the the tail responds to the radio when it's in ready / flight mode but in a menu mode it doesn't change or respond at all.

I've tried rebinding and retrying several times. The weirdest part is I didn't change anything along the way. Anyone have any ideas?

I did a search and found something similar with Walkera radios where they have to set an ID on their radio but I don't think that applies to me.

Thanks again!

John ]]> Setup issues John Kane http://www.beastx.com/showthread.php?2652-No-tail-stick-input-in-setup-or-parameter-menu-to-change-settings-with-spectrum-tx-rx <![CDATA[Unterschied Version 1.1 -> 3.08]]> http://www.beastx.com/showthread.php?2651-Unterschied-Version-1.1-gt-3.08&goto=newpost Tue, 15 May 2012 10:59:07 GMT Liebe Heligemeinde Ich habe einen T-Rex 500 mit BeastX Version 1.1 und einen T-Rex 450 Pro mit BeastX Version 3.08. Mit beiden Helis resp.... Liebe Heligemeinde

Ich habe einen T-Rex 500 mit BeastX Version 1.1 und einen T-Rex 450 Pro mit BeastX Version 3.08. Mit beiden Helis resp. Versionen bin ich für meine Verhältnisse sehr zufrieden. Klar hab ich mit der neueren Version mehr Einstellmöglichkeiten, aber mein Rex500 mit der alten Version fliegt super und ich wüsste nicht, was besser sein sollte. Ist der Unterschied im reinen Flugverhalten zwischen den Versionen für euch spürbar gewesen , oder liegt dieser mehr in den erweiterten Möglichkeiten der Einstellungen ?

Danke für eure Meinungen. ]]> Fragen zur Einstellung GionClau http://www.beastx.com/showthread.php?2651-Unterschied-Version-1.1-gt-3.08 25. OF-Helitreffen (Scale/Semiscale-Treffen) in 78554 Aldingen am 23.+24.6.2012 http://www.beastx.com/showthread.php?2650-25.-OF-Helitreffen-(Scale-Semiscale-Treffen)-in-78554-Aldingen-am-23.-24.6.2012&goto=newpost Mon, 14 May 2012 10:40:43 GMT http://mfgaldingen.bplaced.net/ilch/ http://ofheli.de/ http://mfgaldingen.bplaced.net/ilch/
http://ofheli.de/ ]]> Allgemeine Fragen hoffmannjh http://www.beastx.com/showthread.php?2650-25.-OF-Helitreffen-(Scale-Semiscale-Treffen)-in-78554-Aldingen-am-23.-24.6.2012 Nickpendeln im Speetflug und bei Wind http://www.beastx.com/showthread.php?2649-Nickpendeln-im-Speetflug-und-bei-Wind&goto=newpost Mon, 14 May 2012 09:28:34 GMT Hallo Ich fliege eine Agusta a109 (T-Rex 700E) mit 4 Blatt Rotor leicht gedämpft. Der Heli fliegt sehr gut, was aber im schnellen Flug und... Hallo

Ich fliege eine Agusta a109 (T-Rex 700E) mit 4 Blatt Rotor leicht gedämpft. Der Heli fliegt sehr gut, was aber im schnellen Flug und besonders noch bei mehr Wind auftritt, ist das die Maschine leicht auf Nick pendelt (Delfinbewegung). Alle Einstellungen im Beast (Version 3.08) sind auf Werkeinstellung. Der Heli fühlt sich sonnst sehr gut und Direkt an trotz seiner 8,5 Kg.
Was könnte man noch an Einstellungen vielleicht ändern?


http://www.youtube.com/watch?v=DZtnqLr_1ds

Gruß Dirk Fürstenberg ]]> Fragen zur Einstellung fuerstbk117 http://www.beastx.com/showthread.php?2649-Nickpendeln-im-Speetflug-und-bei-Wind Futaba R7008SB mit Microbeast http://www.beastx.com/showthread.php?2648-Futaba-R7008SB-mit-Microbeast&goto=newpost Mon, 14 May 2012 08:04:47 GMT Hallo, ich habe das Microbeast vom älteren S.Bus Empfänger auf meinen neuen R7008SB an zu schließen. Wenn ich das MB am S.Bus Anschluss 8/SB... Hallo,
ich habe das Microbeast vom älteren S.Bus Empfänger auf meinen neuen R7008SB an zu schließen. Wenn ich das MB am S.Bus Anschluss 8/SB anschließe, initalisiert das MB nicht. Auf dem S-Bus2 Anschluss initialisiert es und alles funktioniert. Ich habe auch schon die 4 Kanalmodi durch die der Empänger kann. Es geht wenn überhaupt nur am S-Bus2 Anschluss. Wo liegt mein denkfehler?

Gruß
Mitch ]]> Fragen zur Hardware Mitch76 http://www.beastx.com/showthread.php?2648-Futaba-R7008SB-mit-Microbeast Amp draw question http://www.beastx.com/showthread.php?2647-Amp-draw-question&goto=newpost Sun, 13 May 2012 23:06:03 GMT My setup uses Savox SH-1250MG on the cyclics and an MKS BLS980 on the tail, the receiver is a AR 6210X with sat rec. Im using a castle 10ABEC to... My setup uses Savox SH-1250MG on the cyclics and an MKS BLS980 on the tail, the receiver is a AR 6210X with sat rec. Im using a castle 10ABEC to power all my electronics and a 1000mAH 3S lipo, the BEC is set to supply 6.0V
I was told that typically , most servos will draw more amps when used in a flybarless system than when used in a flybarred. Is this true and could someone please explain why this is? I'd like to know if Im safe with my setup or should I be concerned.

My ESC is a castle Ice 75A, the red power wire is disconnected to disable the internal BEC. Ive used the exact setup when I was flying with a flybarred setup. ]]> General discussion mr dan http://www.beastx.com/showthread.php?2647-Amp-draw-question T-Rex 500 FBL mit Beast wobbelt leicht im Schwebeflug http://www.beastx.com/showthread.php?2646-T-Rex-500-FBL-mit-Beast-wobbelt-leicht-im-Schwebeflug&goto=newpost Fri, 11 May 2012 21:34:50 GMT Liebe Hobbykollegen Meint T-Rex 500 ESP FBL mit Beast wobbelt leicht im Schwebeflug, am Boden bei diversen Drehzahlen absolut ruhig. Ich habe... Liebe Hobbykollegen

Meint T-Rex 500 ESP FBL mit Beast wobbelt leicht im Schwebeflug, am Boden bei diversen Drehzahlen absolut ruhig. Ich habe schon so ziemlich alles probiert, bzw. ersetzt und diverse Foren durchstöbert, leider hatte ich bis jetzt kein Erfolg.
Könnte eventuell das Microbeast einen Defekt haben?

Besten Dank für sachdienliche Hinweise

Gruss aus der Schweiz
Thomas ]]> Fragen zur Hardware propper http://www.beastx.com/showthread.php?2646-T-Rex-500-FBL-mit-Beast-wobbelt-leicht-im-Schwebeflug T-REX 250 VStabi-Rotorkopf mit Microbeast http://www.beastx.com/showthread.php?2645-T-REX-250-VStabi-Rotorkopf-mit-Microbeast&goto=newpost Fri, 11 May 2012 13:57:15 GMT Hallo, kann mir jemand sagen, ob ich das Microbeast mit dem T-REX 250 VStabi-Rotorkopf Upgrade von Mikado funktioniert und ich mit dieser... Hallo,
kann mir jemand sagen, ob ich das Microbeast mit dem T-REX 250 VStabi-Rotorkopf Upgrade von Mikado funktioniert und ich mit dieser Kombination meinen T-Rex 250 fliegen kann?

Grund der Frage: Auf allen Bildern die ich im www gefunden haben, liegen die Kugelköpfe der Blattansteuerung bei dem Mikado Kopf auf der gegenüberliegenden Seite, als zum Beispiel beim original Kopf von Align oder diverser anderer Hersteller.

Funktioniert V-Stabi mechanisch anders als Microbeast, oder habe ich einfach nur einen Denkfehler?

Es wäre toll, wenn man mir meine Frage beantworten könnte und das jetzt hier nicht in ein anderes Thema davongleiten würde.

Vielen Dank für Eure Antworten / Mossell ]]> Fragen zur Hardware mossell http://www.beastx.com/showthread.php?2645-T-REX-250-VStabi-Rotorkopf-mit-Microbeast Protos 500 http://www.beastx.com/showthread.php?2644-Protos-500&goto=newpost Fri, 11 May 2012 07:27:07 GMT Just converted my Protos over to flybarless. Scorpion HK-3226-900kv Caslte Ice 75A ESC castle 10A BEC (programed @ 6.0v) Castle quick connect... Just converted my Protos over to flybarless.
Scorpion HK-3226-900kv
Caslte Ice 75A ESC
castle 10A BEC (programed @ 6.0v)
Castle quick connect
Savox 1250MG cyclics
MKS BLS 980 tail servo
MicroBeastX V3 !
AR 6210X rx
Mavrikk 430mm main Blades
MSH tail rotors 70mm
6S Voltz lipos, 2600mAh 45C (2 ea)
6S voltz lipos 2600mAh 35C (2 ea.)
6S Sky lipos 2650mAh 40C (4 ea.)
Custom canopy by 'Kloner'

]]> User setups mr dan http://www.beastx.com/showthread.php?2644-Protos-500 Cyclic reactions compaired to a flybarred system http://www.beastx.com/showthread.php?2643-Cyclic-reactions-compaired-to-a-flybarred-system&goto=newpost Fri, 11 May 2012 03:28:15 GMT I just completed my Flybarless conversion on my Protos 500 I went through the BeastX manual very carefully and now await the morning for a test... I just completed my Flybarless conversion on my Protos 500 I went through the BeastX manual very carefully and now await the morning for a test flight. I do have one question before I do so.
On the table when I give any cyclic movement either aileron or elevatior in any direction and release the stick, the cyclic servos are very slow to return to their original position, is this normal? or does it have to do with the cyclic response (G), as for tonight I currently have it set to red flashing "slightly increased" as recomended in the manual. ]]> General discussion mr dan http://www.beastx.com/showthread.php?2643-Cyclic-reactions-compaired-to-a-flybarred-system